Once the weather turns cold, many septic owners make the mistake of thinking their systems won’t need maintenance again until spring when the temperatures start to climb. However, the reality is wintertime septic service is just as, if not more, important as maintenance throughout the rest of the year. Cold weather can have some pretty dangerous effects on your septic system, and keeping ahead of them by maintaining your service visits will help prevent disaster this winter.
Winterizing your system is important for several reasons. All the water in your pipes has the potential to freeze, which can damage the pipes. Taking steps toward preventing broken pipes saves money on costly repairs. Winterizing your septic system lengthens the lifespan of your septic system.
Here are some of the most common complications winter can bring for your septic system.
How to Avoid Septic Problems this Winter?
Protect your septic system from the cold weather by employing the following tips.
1. Consider pumping your septic tank.
If the septic system will be used again before the soil temperature begins to rise, consider having your septic tank pumped before winter. Pumping your tank will allow the effluent leaving the septic tank to be warm, which is desirable for the soil treatment area.
2. Winterize your pipes.
In a septic system left unused through the freezing months, it is important to turn off the water and drain all pipes. Check to make sure there are no leaks or drips, because even small amounts of water can freeze and cause damage. After the water has been turned off, drain the pump by running it for a few moments to clear out any water, open faucets and leave them open, and disconnect the hoses to appliances, such as the washing machine and dishwasher.
3. Inspect your furnace.
If you will be leaving a high-efficiency furnace on for the winter, make sure there is no water draining into the septic system. If there is, reroute the drain hose into a large bucket, or some other drain that is not connected to the septic system.
4. Protect the soil treatment area.
As much as possible, attempt to insulate your soil treatment area. Stop mowing the grass covering the area in the early fall. The longer grass captures fallen snow that acts as insulation over the field. Do not park cars on the drain field. Consider putting several inches of mulch or straw over the drain field to help to insulate the tank and pipes in the drain field.
5. Schedule routine septic maintenance.
The best thing you can do to prepare your septic system for winter is to have it professionally inspected. It is a good rule of thumb to inspect your system every time the season changes.
Who Should You Call for Wintertime Septic Service?
Mid-Tenn Septic & Plumbing is a service oriented company dedicated to providing excellent septic tank cleaning and septic tank pumping services to homeowners in the Mid-Tenn area. We take pride in doing the job that others leave behind.
For any septic emergency this winter, we also offer emergency septic services, 24 hours a day. Whether there’s a leak, an overflowing toilet, or slow drainage, count on the experts at Mid-Tenn Septic & Plumbing to identify the problem, fix the issue, and get you back to enjoying time with your family.
Call us if you suspect that there are problems with your septic system. With over 20 years of experience, we know septic systems and can handle just about any septic emergency.
- Mid-Tenn Septic and Plumbing
- 4470 old Lebanon dirt rd. Mt Juliet TN 37122
- (615) 808-7898
Aside from remembering not to put anything down the drains besides wastewater and toilet paper, you probably won’t have to think about it much. However, if you haven’t been keeping up with maintenance and pumping, you may find yourself with a septic emergency on your hands.
Here’s how to tell whether you need emergency septic tank pumping in Greer, South Carolina. Call a septic contractor right away if you notice any of the signs below.
• Bad odors. Don’t ignore nasty odors coming from your drains, toilets, or drain field. That’s one of the earliest signs of a septic system issue. Your septic system is designed to keep unpleasant smells from your household and drain field—ideally, you should never even know it’s there. When you smell sewage in these areas, it means your tank is full or the pipes are clogged.
• Alarm signals. Most modern septic systems come with alarms to indicate there’s something wrong, such as using too much water or if there’s a leak. If the alarm goes off, call your septic contractor right away. Let them know if you’ve noticed any of the other signs on this list. The more information you can provide about your septic system, the better they can diagnose the issue.
• Pooling. Pooling water over your tank or drain field is a dead giveaway that your septic tank needs to be pumped, and fast. If you fail to properly maintain your system or have it pumped regularly, wastewater will rise to the ground level. This will also smell foul, making it easy to tell whether it’s rainwater or waste. To avoid this, make regular maintenance appointments and stick to them.
• Backups. When your tank fills up, waste can back up into your sinks and drains. Call a contractor right away to pump your tank. Since your tank is already full, putting more strain on it will exacerbate the problem. Try to avoid using the restroom, bathing, washing dishes, and doing laundry until after pumping the tank. It’s unpleasant—but a great reminder to keep up on your septic maintenance.
• Excess nitrates. Finally, a high level of nitrates in your water could mean that your septic system is malfunctioning. Be sure to monitor your water regularly in addition to keeping up with your septic maintenance.
To avoid septic issues in the future, we suggest making calendar reminders for regular maintenance. Septic tanks usually only need to be pumped every three to five years, and component maintenance should be conducted yearly. If you keep up on these appointments, you won’t need to worry about being caught by surprise.
However, sometimes septic systems can malfunction without warning. During high-usage times, like the upcoming fall and winter holidays, keep an eye out for problems. If you notice any of these signs, call SC Septic for emergency septic tank pumping services in Greer, SC.
- SC Septic
- 2327 Stanford Rd, Greer, South Carolina 29651
- (864) 395-5539
Bathroom remodels are among the most widely pursued remodeling projects. As bathrooms are also among the most used rooms in any household, they are more likely to be in need of a remodel. Not just that, the ROI on a bathroom remodel is also significantly higher than other remodels, but so is the cost to remodel them.
The average cost for a mid-range bathroom remodel in the United States is just shy of $20,000. If you consider the fact that more than ⅔ of remodeling projects go over-budget, the numbers tend to add up quickly.
Since that’s the case, how can you approach the budgeting situation? With adequate planning, some helpful tips, and some patience — you’ll have nothing to worry about. Keep reading to find out how you should approach budgeting for your upcoming bathroom remodel.
Understanding the Cost
In order to plan a budget, you need to understand the cost behind a bathroom remodel. As mentioned earlier, the average cost to remodel a bathroom is around $20,000. However, the average cost isn’t necessarily applicable in your case as the actual cost depends on the scope of the remodel.
For conservative remodeling projects, you can expect to shell out anywhere between $3000 to $7000. On the other end of the spectrum lies the upscale remodel which usually costs around $60,000. However, it’s crucial to have an idea about the average cost in order to get to the next step of budgeting.
1. Set Realistic Goals
You need to approach budgeting from a realistic perspective and not a “Pinterest Bathroom Board” perspective. Before you go ahead, you need to lay down the scope of work for your bathroom remodel.
Do you want to gut the existing bathroom to its bare bones and build it from scratch or do you want to simply replace important fixtures?
The scope of the remodel will play a huge role in determining your budget. By laying down the plan as early as possible, you’ll be able to get an accurate estimate for your budget.
2. Understanding the Labor Cost
Another factor that is required to get an accurate estimate is the amount of labor involved in the bathroom remodel. Labor costs make up a huge chunk of your total budget. Hence, it is important that you have a clear idea from the get-go.
Typically, you’d be hiring a general contractor for the remodeling. Next, the contractor will hire other sub-contractors for specialized tasks like plumbing and electrical work. The average cost of an electrician is around $65 to $85 an hour, while a plumber can charge anywhere between $45-$65 per hour. These are the two most expensive aspects of a bathroom remodel which cannot be done on your own as well.
That being said, that’s something you should make your peace with. In fact, it’s better to understand the unavoidable costs from the start. You don’t want to save a couple of hundred bucks now; only to spend it later on leakages and damaged fixtures over the next few months.
3. To DIY or Not to DIY
Hiring professionals for skilled work doesn’t mean that the DIY aspect of a bathroom remodel should be completely neglected. You just need to be mindful that while you get to reduce your budget with a little bit of extra hands-on effort on your part — you would have to factor in the sweat equity that is involved as well.
If you’re particularly handy, however, there are many tasks that you can do which will save you money on labor costs. And if you aren’t, merely taking care of miscellaneous tasks such as the moving of cabinets saves you money on unnecessary labor. This saved money can be used for other purposes or can be used to make up for unexpected costs.
4. Factor in Some Unexpected Expenses
One of the main reasons why people tend to go over-budget is because of additional unexpected expenses. Your bathroom is a fairly technical space with intricate plumbing and electrical work. It is also prone to mold due to moisture retention. Hence, you are more than likely to come face to face with a problem that you were previously unaware of.
Unfortunately, it almost always happens after the remodeling begins. This is why you should factor in at least 20% of your total budget for any unexpected costs that may come up.
By doing this, you are saving yourself from a lot of trouble. You will ensure that you don’t go overboard with the budget, and also be mentally prepared to handle whatever problems that arise along the way.
5. Explore the Cost of the Materials
Contractors usually tend to charge a certain percentage as commission when you buy material through them. Hence, it’s recommended that you buy most, if not all of the material by yourself.
Nonetheless, some materials like insulation and drywall should be bought from the contractor itself as they are experts in their space. But you can easily purchase things like appliances, cabinets, mirrors, hardware, etc. that fit your tastes, and do not require expert advice.
Few Final Thoughts
If the above points indicate anything, it’s that planning is key in budgeting for your bathroom remodel. Well-thought-out planning only helps you in your budgeting structure. Hence, it is important that you revise your plan accordingly while finalizing your budget to make efficient and informed decisions.
Just as much, you must also get multiple quotes from different contractors to truly reap the fruit of your budget plan. The goal here is not to hire the one who offers the cheapest quote. That can sometimes lead to a compromise in the overall quality of the remodel. The ultimate goal here is to be informed on market rates, and subsequently make a decision based on the value provided by the contractor.